BYBPC - ULTRA ETCH MAKE UP SOLUTION, 19152
- MSDS: BYBPC
- Manufacturer: MACDERMID INC
- Product Name: ULTRA ETCH MAKE UP SOLUTION, 19152
- National Stock Number: 6850-00N061988
Product Identification
Product ID:ULTRA ETCH MAKE UP SOLUTION, 19152
MSDS Date:02/15/1993
FSC:6850
NIIN:00N061988
MSDS Number: BYBPC
Responsible Party
WATERBURY, CT 06702
US
Emergency Phone: 800-424-9300 (CHEMTREC)
Info Phone: 203-575-5700
Cage: MACDE
Contractor
Telephone: 203-575-5606/800-424-9300(CHEMTREC)
Cage: 0PX54
Ingredients
1650 MG/KG
CAS: 12125-02-9
RTECS: BP4550000
Fraction By Weight: 15-25%
OSHA PEL 10 MG/M3
ACGIH TLV: 10 MG/M3 FUME
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
COPPER CHLORIDE
CAS: 1344-67-8
RTECS: GL6970000
Fraction By Weight: 15-30%
OSHA PEL N/K
ACGIH TLV: N/K
AMMONIUM HYDROXIDE (CERCLA)
CAS: 1336-21-6
RTECS: BQ9625000
Fraction By Weight: 1-5%
OSHA PEL N/K
ACGIH TLV: N/K
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
LEAD SALTS (MAY CONTAIN)
Fraction By Weight: TRACE
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:SEE INGREDIENT 1.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYES: MAY CAUSE INTENSIVE
BURNING & STINGING SENSATION. INTENSE WATERING WILL OCCUR. STINGING
SENSATION WILL DEVELOP. SKIN: EXPOS WILL RSLT IN BURNING SENSATION.
MAY CAUSE IRRIT & DMG. PROFOUND DMG TO TISS MAY OCCUR W/PRLNG
EXPOS. INGEST: IRRIT & BURNING SENSATION OF LIPS/MOUTH & THROAT.
GENLY (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: CAUSES PAIN IN SWALLOWING. INTENSE
THIRST OCCURS. INHAL: IRRIT OF MUC MEMB OF NOSE/MOUTH/THROAT MAY
OCCUR. WATERING OF EYES/NASAL DISCHARGE/SNEEZING/COUGHING OCCURS.
PRLNG INHAL MAY RSLT IN COUGHING FITS. CHRONIC: NONE SPECIFIED BY
MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:CONT MD IN ALL CASES OF EXPOS. FIRST AIDERS SHOULD PROVIDE
FOR THEIR OWN SFTY PRIOR TO RENDERING ASSIST. EYES: TAKE VICTIM
IMMED TO NEAREST EYEWASH/SHOWER. WASH UNDER SLOWLY RUNNING WATER
FOR AT LEAST 15 MIN. SKIN: WASH W/WATER FOR 15 MIN.INGEST: RINSE
MOUTH & THROAT LIBERALLY W/WATER. NOTIFY MD OF NATURE OF INGESTED
PROD. INHAL: REMOVE TO COOL UNCONTAM AREA. MONITOR PATIENT FOR RESP
(SUP DAT)
Fire Fighting
Extinguishing Media:NEVER ALLOW RUN-OFF TO ENTER SEWERS/WATERWAYS. USE
WATER SPRAY, CARBON DIOXIDE, DRY CHEM, FOAM, HALON. AS
APPROP(SUPDAT)
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:WHEN HEATED TO DECOMPOSITION, CORROSIVE
FUMES ARE EMITTED.
Accidental Release
Spill Release Procedures:NEVER ALLOW SPILLS TO ENTER SEWERS/WATERWAYS.
SOAK UP INERT INTO ABSORB MATL. DO NOT USE SAWDUST. COLLECT FOR
DISP IN PLASTIC RECOVERY DRUM. FLUSH RESIDUE W/PLENTY OF WATER TO
CHEM DRAIN.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:MATERIAL SHOULD BE STORED IN THE
PROPERLY SEALED ORIGINAL CONTAINER.
Other Precautions:CORROSIVE MATERIALS MUST NOT BE ABOVE, BELOW OR
ADJACENT TO: FLAMMABLE SOLIDS, OXIDIZING MATERIALS OR CYANIDE
BEARING MATERIALS (POISONS). ACID BEARING MATERIAL SHOULD BE STORED
SEPARATE FROM ALKALINE MATERIALS.
Exposure Controls
Respiratory Protection:IF OSHA-PEL/ACGIH-TLV ARE EXCEEDED, IT IS REC
THAT NIOSH/MSHA APPRVD RESP BE USED. CONSULT W/YOUR INDUSTRIAL
HYGIENIST FOR APPROP CARTRIDGE SELECTION & USE. FOR LGE SPILLS,
ENTRY INTO LGE TANKS, VESSE LS/ENCLSD SML SPACES W/INADEQ (SUP DAT)
Ventilation:GEN VENT IS REC. ADDITIONALLY, LOCAL EXHAUST VENT IS REC
WHERE VAPORS, DUSTS, MISTS, OR AEROSOLS MAY BE RELEASED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS .
Other Protective Equipment:WEAR CHEMICAL APRONS, BOOTS. EYEWASH
FOUNTAIN AND SAFETY SHOWER MEETING ANSI DESIGN CRITERIA .
Work Hygienic Practices:IF CLTHG CONTAM, REMOVE CLTHG & THORO WASH
AFFECTED BODY AREA. LAUNDER CONTAM CLTHG BEFORE REUSE.
Supplemental Safety and Health
PH:8.2-8.8. EXTING MEDIA:FOR SURROUND MATL. FIRST AID PROC: DISTRESS.
CAUTION: IF UNCON/HAVING TROUBLE BRTHG/IN CONVULS, DO NOT INDUCE
VOMIT/GIVE H*2O. ALWAYS CLEAN CONTAM CLTHG & GEAR PRIOR TO REUSE.
NEVER ADMIN ANYTHING TO UNCON PERS. RESP PROT: VENT, PRESS-DEMAND,
SCBA IS REC. EYE PROT: & FULL LENGTH FCSHLD.
Chemical Properties
Melt/Freeze Pt:M.P/F.P Text:32F,0C
Spec Gravity:1.20
pH:SUPDAT
Solubility in Water:COMPLETE
Appearance and Odor:BLUE LIQUID WITH AMMONICAL ODOR
Stability
Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:UNKNOWN.
Hazardous Decomposition Products:OXIDES OF NITROGEN AND AMMONIA VAPORS.
Disposal
Waste Disposal Methods:DISP OF BY APPRVD METH AT APPRVD SECURE
FACILITY. DUE TO MORE RESTRICTIVE WASTE DISP REGS, NEVER WASTE
TREAT/DISP OF MATL UNTIL YOU CHECK YOUR APPROP LOC, STATE, & FED
REGS FOR REQUIREMENTS. SPILLS MA Y REQUIRE NOTIFICATION TO FED,
STATE &/LOC AUTH.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.